Custom Glass Shower Enclosures Built To Your Space
Some showers need more than a single door. We design multi-panel enclosures for corners, neo-angles, and walk-ins, each measured to your opening and built in-house, then installed by our own crew from Sterling Heights nearby.
Bespoke Enclosures For Unusual Openings
A shower door handles a simple opening, but plenty of bathrooms in Mount Clemens are not simple. Maybe your shower tucks into a corner, follows a neo-angle across the floor, or runs as a long walk-in with a fixed panel and a door beside it. Those layouts call for a custom enclosure, a set of glass panels planned and measured to work together. We start by understanding the whole space, where the water lands, where you step in, how the panels should meet, and which edges need a door. Then we design an enclosure around that, not around whatever stock kit happens to be on a shelf.
Building to the opening matters most in older homes, and Mount Clemens has plenty of those near downtown. Walls that have settled, floors that slope a little, and corners that are not a true ninety degrees all throw off a one-size enclosure. Because our family measures every panel and fabricates the glass ourselves, we can account for those quirks instead of fighting them. Panels are cut so they meet cleanly, the door lands square, and the seams sit where water will not sneak through. Our own crew installs the whole enclosure, so there is no handoff to an outside glass shop and no finger-pointing if something needs a tweak.
Custom Glass Shower Enclosures, measured and built for Mount Clemens.
Corners And Neo-Angles
Corner and neo-angle showers use panels that meet at an angle with a door built into the run. We plan how the glass joins, where the hinges go, and how the door clears the curb, then cut each panel to suit your exact corner rather than forcing a stock shape.
Inline And Walk-In
For a wider opening we build an inline enclosure, a fixed panel with a door beside it, or an open walk-in with a single stationary screen. Both give a bright, roomy shower. We size the panels and plan the support so the glass stays steady and the entry feels open.
Measured, Not Stocked
A custom enclosure is drawn from your real measurements, not pulled off a shelf. We record every width, height, and angle, note where walls lean, and fabricate each panel to those numbers. In an older Mount Clemens bathroom, that is the difference between a tidy fit and a set of visible gaps.
From Measure To Finished Enclosure
Every enclosure starts with a free in-home measure in Mount Clemens. Because these projects have more moving parts than a single door, we spend the time to get them right, measuring each wall and angle, checking the curb, and talking through how you use the shower. We go over glass thickness, hardware, and a finish that ties into the room, all with no pressure. You get a clear written quote that spells out the panels and the plan. Nothing gets ordered until you are comfortable with the design and the number in front of you.
When the glass is ready, our own crew installs the full enclosure. We set the fixed panels plumb, join the corners or neo-angle cleanly, hang the door so it swings true, and seal the seams that keep water inside. We take our time squaring everything, because a multi-panel enclosure only looks right when the lines are straight and the gaps are even. Then we test the door, wipe the glass down, and walk you through care for hard-water country. One family carries the whole project, from the first measurement to the final adjustment, so the work stays consistent throughout.
- Corner and neo-angle layouts
- Inline door and panel
- Open walk-in screens
- Every panel measured custom
- A full range of finishes
- Built and installed in-house
Common questions.
What makes a shower enclosure custom?
A custom enclosure is more than one door. It is a set of glass panels, a fixed panel and a door, a corner, a neo-angle, or a walk-in screen, all measured and built to fit one specific opening. Rather than adapting a stock kit, we plan the panels around your shower so they meet cleanly and the door lands square.
Do you build custom enclosures for Mount Clemens homes?
Yes. We serve Mount Clemens and Macomb County from our Sterling Heights showroom at 42624 Van Dyke Ave, a short drive from downtown. A custom enclosure needs a careful in-home measure, so we come to you, study the space, and take every dimension ourselves. You never have to haul measurements or photos to us to get started.
My shower corner is not square. Can you still build an enclosure?
Yes, and older Mount Clemens homes make this common. Settled walls and corners that are off a true ninety degrees are exactly why we measure every panel by hand. We cut the glass to the angles that are really there, so the panels meet cleanly and the door closes right. Building custom is how we work around an opening that is not perfectly square.
With more glass in an enclosure, is hard water a bigger issue?
There is more surface to keep clear, yes, and Metro Detroit water is hard. That is why we steer you toward easy-clean glass and quality hardware on an enclosure, where the panels and seams see a lot of water. A quick squeegee after showers keeps minerals from building up. We show you the routine so a large enclosure stays clear.
What glass do you use for a walk-in or fixed panel?
Our standard is 3/8 inch tempered safety glass, the same heavy glass we use on our doors. For a walk-in screen or a tall fixed panel, that weight and stiffness help the glass stand steady with the right support. During the free measure we plan any bracing the layout needs and go over your finish choices.
Design A Custom Enclosure For Your Shower
Call (586) 315-8900 or text (586) 800-9481 to schedule a free in-home measure in Mount Clemens. Email [email protected] with photos or questions and we will help you plan.