Shower Door Replacement in Sterling Heights, MI
Leaking, foggy, rusted, or just dated. When a shower door is done, we take the old one out and put custom glass in its place. Your tile stays exactly where it is.
When the Old Door Is Past Saving
You know when a shower door is finished. Water gets past the bottom no matter how you close it. The glass has a permanent cloud you cannot scrub off. The frame has gone chalky or rusted at the corners. The rollers drag, the door does not sit square anymore, and the whole thing looks like the decade it came from. Sterling Heights has plenty of original enclosures still hanging in 1960s and 1970s baths, and plenty of builder-grade units out in the newer subdivisions that are simply worn out. At some point, no amount of cleaning or fussing brings one back. The door has to go.
Here is the part most homeowners do not expect. Replacing the door is not a remodel. The old enclosure comes out, we build new glass to the opening you already have, and your tile, your pan, and your plumbing are never touched. You are not living through demo. You are not re-tiling a wall just to fit a new door. It is one of the least expensive ways to make a dated bathroom feel renovated, and it is the change people actually notice. A tired framed unit out, clean new glass in, and the room reads like you did the whole bath.
Shower Door Replacement, measured and built for Sterling Heights.
Your Tile Stays
New glass goes into the opening you already have. No demo, no tile work, no plumbing. If your tile and pan are in good shape, there is no reason to tear them out just because the door failed, and we will tell you honestly what we see when we come out to measure.
Hard Water Damage
In Macomb and Oakland County, hard water is what kills most doors. Minerals etch into untreated glass over the years, and once glass is etched, no cleaner brings it back. That permanent haze is one of the most common reasons homeowners here replace a door that still technically works.
Upgrade While You Swap
Replacement is the natural moment to change the look. A dated framed unit can come out and frameless or semi-frameless glass can go in, with hardware in a full range of finishes. Same opening, same tile, completely different bathroom. We will lay out the options at the measure.
What Replacement Actually Looks Like
It starts with a free in-home measure. We do not work off the old door's size, because your walls have moved since it went in, and the old unit may never have been right in the first place. We take fresh numbers off the actual opening. Then you choose the new setup, the glass, and the hardware finish. We fabricate it, and our own crew comes back, takes the old enclosure out, and installs the new one. One family, start to finish, no subcontracted glass.
We will also be straight about scope. Fortune measures, fabricates, installs, and replaces. We do not do tile, demo, or plumbing, and we do not patch up an old enclosure to buy it another year. If your glass is etched, your frame is corroded, or the unit no longer sits square in the opening, replacement is the honest answer, and that is the work we do well. If we see something behind the door that needs a tile pro first, we will point it out so you can get it handled before we build.
- Free in-home measure
- Old enclosure removed
- New glass, same tile
- Fresh measurements, not old sizes
- Framed or frameless replacements
- Installed by our own crew
Common questions.
Do I have to redo my tile to replace the door?
In most cases, no. We build the new glass to the opening you already have, so the tile, the pan, and the plumbing stay untouched. That is what makes a door swap such a big visual change for such a contained job. If we spot tile that is failing behind the old enclosure, we will show you at the measure so you can decide how you want to handle it.
My glass is permanently cloudy. Can it be cleaned?
Once hard water has etched the surface, no. Metro Detroit water is hard, and over the years those minerals bite into untreated glass. What looks like film is actually damage to the surface, and no cleaner or scrub pad reverses it. That is why replacement is the real fix. When we build the new door, ask about easy-clean glass so the next one does not go the same way.
Should I replace my shower door or try to fix it?
It depends on what has failed. When the glass is etched or clouded and will not come clean, or the frame has rust and the seals are worn out, a new custom enclosure usually gives a better and longer lasting result than patching the old one. Call the showroom at (586) 315-8900 or text us a photo of your door, and we will tell you honestly what we think makes sense for your bathroom.
What do I need to do before the measure?
Nothing but clear a path to the shower. Someone from the family comes out, takes real numbers off your opening, looks at the condition of the tile and the pan, and shows you glass and hardware samples in your own light. We talk through what makes sense for your bathroom and give you a straight quote. It is free, there is no pressure, and you decide on your own time.
Do you replace doors throughout Sterling Heights?
Yes. The showroom is at 42624 Van Dyke Ave, right here in the city, and we replace enclosures across Sterling Heights and the surrounding Macomb and Oakland County communities. Call (586) 315-8900, text (586) 800-9481, or email [email protected] and we will set up a free in-home measure. You are also welcome to stop by during the week or on Saturday.
Ready to Replace That Old Door?
Call (586) 315-8900 or text (586) 800-9481 for a free, no-pressure in-home measure. New glass, your existing tile, and a straight quote before anything starts.