Steam Shower Enclosures In Southfield
Fortune builds full-height sealed steam shower enclosures with a transom or header to hold steam, tight seals, and proper venting. Measured, fabricated, and installed by our own family crew for Southfield homes.
Sealed Glass That Keeps The Steam In
A steam shower enclosure is different from a standard door, because its job is to trap steam rather than just contain splashing water. That means full-height glass that runs to the ceiling, a transom or header across the top, and tight seals all around so the steam stays inside where you want it. For homeowners in Southfield adding a steam feature, the glasswork is what makes the room actually perform. Loose gaps let steam escape and undercut the whole experience, so this is a build where precise measuring and careful sealing genuinely matter.
Fortune measures your opening in person and fabricates the enclosure to fit, keeping every step with our own family crew and no subcontracted glass. We use 3/8 inch tempered safety glass as our standard and design the transom and seals to suit your ceiling height and layout. At your free Southfield measure we talk through how the enclosure will seal, where the header sits, and hardware finishes from a full range of options. We do the glass enclosure itself. We are honest about the fact that a working steam room also relies on the steam equipment and any tile or waterproofing done by your other trades.
Steam Shower Enclosures, measured and built for Southfield.
Full-Height Seal
A steam enclosure runs to the ceiling with a transom or header, not the open top of a standard shower. That full-height glass and tight seal are what hold the steam in, so your Southfield steam feature actually performs the way it is meant to.
Tight Seals And Venting
Steam wants to escape, so the seals matter. We fit the panels and header closely and plan venting so the enclosure holds steam during use and clears afterward. Precise in-person measuring is what makes those tight tolerances possible in your Southfield bathroom.
Heavy Tempered Glass
We build steam enclosures from 3/8 inch tempered safety glass, the same quality standard as our other work. That weight gives a tall, sealed enclosure the rigidity it needs and pairs with hardware chosen from a full range of finishes to match your fixtures.
A Steam Enclosure Done Right In Southfield
Adding a steam shower is a real upgrade, and the glass enclosure is the part that makes or breaks it. Unlike a normal door, a steam build has to be sealed top to bottom, which is why the transom, the header, and the seals get so much attention. Southfield's mix of homes and condos means ceiling heights and layouts vary, so we measure each one in person and fabricate the enclosure to match. Getting those dimensions right is what lets the finished room hold steam instead of leaking it into the rest of the bathroom.
Metro Detroit's hard water applies here too, and a steam enclosure sees a lot of moisture, so easy-clean glass and quality hardware are worth discussing at your Southfield measure. A daily squeegee helps keep the panels clear. We will also be straight about scope. We build and install the glass enclosure with our own crew, and a fully working steam room depends on your steam generator and on tile or waterproofing handled by other trades. We focus on doing the glass part right so it seals and looks the way it should.
- Full-height sealed glass
- Transom or header on top
- Tight seals and venting
- Measured to your ceiling
- Full range of finishes
- Free in-home measure
Common questions.
What makes a steam enclosure different?
A steam enclosure is sealed top to bottom to trap steam, while a standard shower door is open at the top and only contains water. Steam builds run full-height with a transom or header and tight seals all around. That sealing is the whole point, so we measure your Southfield opening and ceiling carefully and fabricate the glass to hold the steam in.
Do you provide the steam generator too?
No, we build and install the glass enclosure itself. The steam generator and its plumbing, along with any tile or waterproofing, are handled by other trades. We are upfront about that so your project is planned correctly. Our part is the sealed glass enclosure with its transom and tight seals, measured and fabricated to fit your Southfield bathroom and installed by our own crew.
Do you build steam enclosures in Southfield?
Yes. Fortune serves Southfield and the rest of Oakland County from our Sterling Heights showroom. Our family crew brings the free measure to your home, fabricates the sealed enclosure in-house, and returns to install it. Call (586) 315-8900 or text (586) 800-9481 to set up a visit and talk through what your steam project needs from the glass.
How do you keep steam from leaking out?
Tight tolerances. A steam enclosure needs full-height glass, a transom or header across the top, and closely fitted seals, which is why we measure your Southfield opening and ceiling in person. We fabricate the panels to match those dimensions and plan the seals and venting so the enclosure holds steam during use and clears afterward, rather than letting it escape into the room.
Does hard water affect a steam enclosure?
It can, because a steam enclosure sees a lot of moisture and metro Detroit water is hard. Mineral spotting is worth planning for on the tall glass panels. We talk through easy-clean glass and durable hardware at your Southfield measure, and a daily squeegee keeps the panels clearer. We give honest upkeep guidance so the enclosure keeps looking sharp rather than promising it never needs care.
Book Your Free Steam Consult
Planning a steam shower? Call (586) 315-8900 or text (586) 800-9481 for a free, no-pressure in-home measure and quote in Southfield.