Bathroom Remodel Shower Doors In Southfield, MI
One bathroom out of service, a tile setter on the calendar, and a family still living in the house. Glass is the last thing in, which makes when you call about it matter more than most people expect.
Where The Glass Falls In Your Remodel
This is the bathroom you actually use, and that changes how the whole job feels. The enclosure is the closing piece, and it cannot be ordered until the surfaces it seals against are finished. Demolition, plumbing, waterproofing and tile all belong to other trades and all come first. Once the grout is cured, the opening finally has real numbers, and that is the day a measure is worth booking.
There are two versions of this project. In the first, the tile is still solid and the enclosure is the only thing being changed, which is a far smaller job than people expect and is covered on the shower door replacement page. Around here that is usually a hall bath, the second bathroom in a house built in the 1960s or 1970s, or the one full bath in a condo. In the second version the room is coming apart entirely, and the glass waits for new tile.
Either way the old enclosure comes out and leaves with our crew instead of sitting in your driveway. When the opening is a tub, the bathtub shower doors page covers it. When the room is tight, which plenty of Southfield secondary baths are even in houses that are large overall, sliding shower doors keep a swinging panel from taking floor space you do not have to give.
Three Things To Settle Before We Measure
Which Way The Door Opens
Swing clearance is the decision that quietly drives everything else in a small bathroom. A panel that opens into the vanity, the toilet or the door coming into the room turns a finished remodel into a daily annoyance. Stand in the space, open an imaginary door, and tell us what you found at the measure.
Whether The Tile Is Staying
That answer sets the calendar. Existing tile means the opening you already have is the opening we measure. New tile means the measure waits for it, and the thickness going on the wall shifts the numbers enough to matter. Say which version you are doing on the first call and the rest gets easier.
How Much Cleaning You Want
Hard water is a fact of life across Metro Detroit and this city gets the same of it as everywhere else. Easy-clean glass, less track for film to collect in, and a daily squeegee are what keep panels looking new. It is a choice made before the glass is built, not something added to a finished enclosure.
Living In The House While One Bath Is Down
Glass is rarely what holds up a remodel, but it can be, and there are only two ways that happens. The measure gets booked too early, before the grout is in, and the numbers move underneath it. Or the finish and configuration are still open on measure day, so nothing can be built yet. Both are avoidable with one conversation up front. Much of this city is brick ranches and colonials that have had decades to settle, so measuring the wall as it stands today matters more here than it would in a house that went up last season.
Install day is short on drama from your side. The room needs to be clear, the path in from the front door needs to be walkable, the old enclosure goes out, the new panels come in, and the silicone gets its cure time before the first shower. If a metal frame is the right answer for your opening, or the look you want on purpose, the framed shower doors page covers that choice.
- Book the measure once tile is set and grout has cured
- Have the door hand and handle side decided in advance
- Keep the path from the front door to the bathroom clear
- Expect the enclosure to be one of the last items in the room
- Ask about easy-clean glass before the panels are built
- The old enclosure leaves with our crew, not with your dumpster
Common questions.
When in the remodel should I call?
As soon as the layout is settled, even if demolition has not started. That first conversation covers configuration, door hand and what the walls will need. The measure itself gets booked for after tile and grout. Separating those two calls is what keeps the glass from becoming the thing everyone is waiting on.
Can you measure before the tile goes in?
We can look at the room and talk through options at any point. Cutting glass is different. Tile thickness, curb build-up and how the finished wall leans all change the dimensions, and panels are made to the numbers we take. Measuring early means measuring a room that no longer exists by install day.
My contractor wants to supply the shower door.
That is between you and your contractor. If you want us, say so early so the glass is left out of their scope and the measure is scheduled after tile. What is worth insisting on either way is that the enclosure is measured off your finished opening rather than ordered as a stock size.
Do I need to be home for the measure?
Someone who can make decisions should be. It is free, it happens in your own bathroom, and it is where hand, hardware, glass and clearance actually get chosen. Most of it is a kitchen table conversation once the numbers are taken, and there is no pressure to settle anything that day.
What happens to the old enclosure?
It comes out and goes with us, since removal and haul-away are part of the job. You are not left storing a frame and a panel of glass until trash day. What stays is your tile, your pan and your plumbing, none of which we touch on a straight enclosure swap.
One bathroom is out of service. What keeps it moving?
Decide early and measure late. The two stalls we see are a measure taken before grout and a finish choice still open on measure day. Handle those and the glass slots in where it belongs, at the end, without being the reason the room stays taped off.
Finish The Bathroom With Real Glass
Call or text when the tile is going in and we will get the free in-home measure on the calendar. No-pressure quote, built in house at 42624 Van Dyke Ave in Sterling Heights. Call (586) 315-8900 or text (586) 800-9481.