Custom Glass Shower Enclosures For Rochester Hills
Fully bespoke multi-panel enclosures measured to your exact opening, from corner and neo-angle showers to inline door-and-panel and open walk-ins. Built in-house by our family and installed across Rochester Hills.
Glass Built To Your Exact Layout
The larger homes and custom builds around Rochester Hills often come with primary baths that were not designed around a stock shower door. You might have a shower tucked into a corner, a neo-angle unit set on the diagonal, a long inline run with a door beside a fixed panel, or an open walk-in with no door at all. A single off-the-shelf enclosure cannot answer all of those. A custom glass enclosure can, because it is measured and built for the exact space you have. Whatever shape your shower takes, the glass is planned around it rather than the other way around.
Multi-panel enclosures ask more of the measuring and the fabrication, which is exactly why this is work for one family that handles the whole job. Corners have to meet cleanly, panels have to line up, and the door has to hang true even when the walls and curb are not perfectly square, which they rarely are in a real bathroom. We measure every opening in person, fabricate the glass to those numbers, and install it ourselves with no subcontracted glass in the chain. That control is what keeps the seams tight and the doors aligned on a complicated layout, so your finished enclosure looks intentional from every angle.
Custom Glass Shower Enclosures, measured and built for Rochester Hills.
Any Shower Shape
Corners, neo-angles, inline door-and-panel runs, and open walk-ins all call for a different glass plan. A custom enclosure handles whatever layout your Rochester Hills bath was built around, with panels measured and cut to fit that exact configuration instead of a stock size.
Measured To The Opening
Real bathrooms are rarely perfectly square. We measure your walls, curb, and openings in person and fabricate each panel to those precise numbers, so corners meet cleanly and the door hangs true even when the room itself is a little out of plumb.
One Family, Whole Job
A multi-panel enclosure has more that can go wrong when it is handed between crews. We measure, fabricate, and install every piece ourselves, with no subcontracted glass, keeping the seams tight and the alignment right from the first measurement to the last seal.
From Measure To Finished Enclosure
Every custom enclosure begins with a free, no-pressure measure at your Rochester Hills home. For a multi-panel layout that visit matters even more, because we map the corners, angles, and openings that make your shower unique. We talk through the panel plan, the glass, and the hardware finish from a full range of finishes, and we flag anything about the space worth knowing early. You see a clear plan and an honest quote before we cut a single panel, with no pressure to commit on the spot.
Once the plan is set, the same family fabricates the glass and installs the enclosure piece by piece. We bring the panels cut to your exact numbers, fit the corners and the door together, set everything level, and seal the joints that keep water where it belongs. There is no subcontracted glass and no handoff between crews on a job this precise. When we finish, you have a custom enclosure that fits your Rochester Hills bath exactly and looks deliberate from every angle.
- Corner and neo-angle showers
- Inline door-and-panel runs
- Open walk-in enclosures
- Measured to your exact opening
- 3/8 inch tempered glass
- In-house fabrication and install
Common questions.
Do you build custom shower enclosures in Rochester Hills?
Yes. We design and build custom glass enclosures throughout Rochester Hills and Oakland County from our Sterling Heights showroom, a short drive to the southeast. You do not need to come in first. We bring the free measure to your home, plan the enclosure around your space, then fabricate and install it with our own family crew. Call (586) 315-8900 or text (586) 800-9481.
Can you build a neo-angle or corner shower enclosure?
Yes. Corners, neo-angles set on the diagonal, inline door-and-panel runs, and open walk-ins are all part of what a custom enclosure covers. We measure the exact angles and openings in your bathroom and fabricate the panels to fit that specific layout. Unusual shapes are where custom glass earns its keep, since a stock door simply cannot follow those lines.
My bathroom walls are not perfectly square. Is that a problem?
It is normal and not a problem for custom work. Very few bathrooms are perfectly plumb, especially in older or heavily renovated homes. Because we measure your actual walls and openings and cut every panel to those numbers, we build the enclosure to fit the room as it really is. That in-person measure is exactly how we account for walls that lean or curbs that run long.
How long does the in-home measure take?
For a custom enclosure we take our time, because a multi-panel layout has more to capture than a single door. We map the corners, angles, curb, and openings, look at the tile and the door swing, and talk through the panel plan and finishes right there. The visit is free and no-pressure, and you leave with a clear understanding of what we would build and an honest quote.
How do I keep a large glass enclosure clean?
With more glass, easy care matters more, and Oakland County water is hard. Ask us about protective easy-clean glass, which helps the panels shed water and slows mineral spotting. A quick wipe-down after showers keeps a big enclosure clear, and quality hardware stands up to daily use. We are glad to walk through maintenance for your specific layout during the measure.
Ready To Plan Your Custom Enclosure?
Book a free, no-pressure in-home measure and quote. Call (586) 315-8900 or text (586) 800-9481, and our family will plan a custom enclosure for your Rochester Hills bath.