Custom Glass Shower Enclosures In Troy, MI
Bespoke multi-panel enclosures measured to your exact opening, from corner units to neo-angles and walk-ins. Fortune designs, builds, and installs every enclosure in-house from our Sterling Heights showroom, a short drive from Troy.
Built Around Your Shower, Not A Kit
Some showers do not fit a single door off a shelf, and that is where a custom enclosure comes in. When your shower wraps a corner, sits at a neo-angle, runs long as an inline door-and-panel, or opens up as a walk-in, you need glass built for that exact geometry. We design multi-panel enclosures around your opening, so the panels meet cleanly, the door hangs true, and the whole thing looks like it was meant for the space, because it was. In Troy, where newer luxury builds and renovated colonials both feature bigger, more interesting shower layouts, a made-to-measure enclosure is often the only way to do it right.
A custom enclosure is really an exercise in precise measurement and clean joinery. Corners have to be square or the panels will not meet, neo-angles need the right angle cut, and a walk-in panel has to be sized and braced so it stands solid without a door to lean on. Our family measures every opening in person, fabricates the glass to those numbers, and installs it with our own crew, so nothing gets lost between a shop and a separate installer. We use 3/8 inch tempered safety glass as our standard for a substantial, lasting build. The payoff is an enclosure that fits your Troy shower like it grew there.
Custom Glass Shower Enclosures, measured and built for Troy.
Corners And Neo-Angles
Corner and neo-angle showers need panels cut and joined at exact angles so they meet cleanly and seal. We measure the geometry in person and fabricate each panel to fit, so your enclosure wraps the corner without awkward gaps. It is the kind of layout a stock door simply cannot handle.
Walk-Ins And Panels
A walk-in or an inline door-and-panel setup gives you an open, spa-like entrance with fewer moving parts. The trick is sizing and bracing a fixed panel so it stands solid and clear. We build these to your exact opening, so the glass feels planted and the walk-in stays open and inviting.
Solid 3/8 Inch Glass
Every custom enclosure we build starts with 3/8 inch tempered safety glass. That thickness gives multi-panel layouts the rigidity they need, especially fixed panels and walk-ins that stand on their own. It is a heavier, steadier build that holds its shape and its seals across a big, custom shower.
Measured, Fabricated, And Installed In-House
A custom enclosure has more panels, more seams, and more chances for a mismatch, which is exactly why one team should handle all of it. Our family takes the measurements, cuts the glass, drills the hardware, and installs the finished enclosure, with no glass subcontracted out to another shop. When the same people who measured your Troy shower are the ones setting the panels, the corners meet, the door aligns, and the seals sit where they should. On a big multi-panel job, that continuity is the difference between a clean result and a frustrating one.
Bigger enclosures also mean more glass to keep clear, and Oakland County hard water does not go easy on any of it. We plan for that from the start. We can build your enclosure with easy-clean glass, lay out the panels so water drains instead of pooling in a joint, and use hardware that resists spotting and corrosion. On a custom shower you invested real thought into, that care keeps it looking the way it did on day one. We would rather build something that stays beautiful than something that just photographs well.
- Corner and neo-angle layouts
- Inline door-and-panel builds
- Open walk-in enclosures
- 3/8 inch tempered glass
- Measured to your opening
- Built by our own crew
Common questions.
Can you build glass for an odd-shaped shower?
That is exactly what a custom enclosure is for. Corner showers, neo-angles, long inline layouts, and walk-ins all need glass cut and joined for that specific shape. We measure the geometry of your Troy shower in person, then fabricate each panel to fit and install it with our own crew. If a stock door will not work for your opening, a custom enclosure will.
How do you measure for a multi-panel enclosure?
We come to your Troy home and measure the full opening in person, including each wall, the curb, the angles where panels meet, and anything that could get in the way. Custom enclosures live or die on accurate numbers, so we take them ourselves rather than trusting a rough sketch. Then we fabricate the panels to those measurements and install them. The measure is free and no-pressure.
Do you do walk-in showers without a door?
Yes. A walk-in enclosure uses one or more fixed panels to shield the shower while leaving an open entrance, with no door to swing or slide. The key is sizing and bracing the panel so it stands solid and looks clean. We build walk-ins to your exact opening in 3/8 inch tempered glass, so the panel feels planted and the entrance stays open and airy.
Do you install custom enclosures in Troy?
We do. Fortune builds and installs custom glass shower enclosures throughout Troy and the rest of Oakland and Macomb County, working from our showroom at 42624 Van Dyke Ave in Sterling Heights, a short drive away. Our own family crew handles the measure, fabrication, and install. We bring the free measure and quote to your home, so getting started is easy.
How do I keep a big glass enclosure clean here?
More glass means more surface for Metro Detroit hard water to spot, so easy care matters on a custom enclosure. We can build yours with easy-clean glass and lay out the panels so water drains rather than sitting in a joint. A squeegee after showers and an occasional cleaning keep it clear. Quality hardware also resists corrosion against the constant moisture in a shower.
Design A Custom Enclosure For Troy
Start with a free, no-pressure in-home measure and quote. We map your exact opening and build glass to fit it. Call (586) 315-8900 or text (586) 800-9481.