Framed Shower Doors in Grosse Pointe, MI
Glass held in a full metal frame, the most forgiving and budget-friendly way to enclose a shower or a tub. Custom measured for Grosse Pointe homes by the family that builds and installs them.
A Frame Around Every Edge
A framed shower door is exactly what it sounds like. The glass is captured in metal on all of its edges, top, bottom, and both sides, and that frame carries the weight and holds the shape. Because the frame does the structural work, the glass itself can be thinner and the whole unit costs less than frameless work. It is the most forgiving style we build, which is the quiet reason it still shows up in so many bathrooms. If an opening is a little out of square, the frame has the tolerance to absorb it and still close cleanly. That is a real advantage in a house that has been standing a long time.
Grosse Pointe has a lot of older housing stock, and older bathrooms often come with walls that have settled, tile that was set by hand, and openings that measure differently at the top than at the bottom. A framed door is built for that reality. The frame gives us room to work with the opening you actually have rather than the one a factory imagined. We measure your shower or tub opening in person, fabricate the door to those numbers, and install it ourselves. Same family, start to finish, no subcontracted glass and no crew seeing your bathroom for the first time on install day.
Framed Shower Doors, measured and built for Grosse Pointe.
Framed On All Edges
Metal wraps the glass on every side, so the frame carries the load instead of the panel. That makes the door sturdy, simple, and predictable. It also means the glass can be thinner than the heavy 3/8 inch we use on frameless work, which is part of why framed costs less.
Forgiving On Old Walls
Older Grosse Pointe bathrooms are rarely perfectly square. A framed door has more tolerance built into it than any other style, so it can meet a wall that leans slightly and still seal and close the way it should. The frame quietly takes up the difference.
Finishes To Match
The frame is visible, so its finish matters. We offer a full range of finishes and help you match the frame to your faucet, your shower valve, and the rest of the hardware in the room. Bring us a photo at the measure, or just ask and we will talk it through.
Where A Framed Door Makes Sense
Framed doors earn their keep over tubs and in older baths, which describes a great many bathrooms in Grosse Pointe. If you have a tub alcove with tile on three sides, a framed enclosure closes it in simply and reliably. If you are updating a secondary bath, a guest bath, or a kids bath and you want the budget to go further, framed is usually the honest recommendation. It is not the showpiece that frameless is. It is the workhorse, and there is nothing wrong with a workhorse in the right room.
One honest note about framed doors and Metro Detroit water. A frame means channels, and channels are where hard water, soap, and grit like to collect. It is not a flaw so much as a trade. You get a sturdier, friendlier priced door, and in exchange you wipe the track and the frame instead of only the glass. Ask us about easy-clean glass at the measure, keep a squeegee handy, and give the bottom channel a pass now and then. That is the whole maintenance story.
- Metal frame on all edges
- The most budget-friendly style
- Forgiving in out-of-square openings
- Strong choice over a tub
- Full range of frame finishes
- Measured and built to fit
Common questions.
Why would I choose framed over frameless?
Cost and forgiveness. A framed door is the most budget-friendly style we build, because the frame carries the load and the glass can be thinner. It is also the most tolerant of an opening that is not perfectly square, which is common in older Grosse Pointe homes. Frameless is the showpiece. Framed is the practical, sturdy choice, and in the right bathroom it is the smarter one.
Will the frame rust or corrode over time?
The frames we use are made for wet rooms, and the finishes are meant to live in a bathroom. What shortens the life of any framed door is neglect of the channels, where standing water and soap sit. Wipe the frame and the bottom track now and then and it holds up well. If your current framed door has already rusted or pitted, we replace it with new custom glass.
Do you install framed doors in Grosse Pointe?
We do. We are a family owned showroom at 42624 Van Dyke Ave in Sterling Heights, and Grosse Pointe is part of the area we serve. The free in-home measure comes to you, so there is no trip and no charge just to get a real number for your bathroom. Call (586) 315-8900 or text (586) 800-9481 and we will find a time that works.
How do I keep hard water out of the frame and track?
Metro Detroit water is hard, so minerals will show up anywhere water sits. On a framed door, that is mostly the bottom channel. Keep it clear of standing water, wipe it down when you clean the bath, and squeegee the glass after a shower. We can also talk through easy-clean glass options during the measure, which makes the glass itself much easier to keep clear.
Does the whole bathroom have to be redone first?
No. A framed door goes into the opening you already have. We do not do tile, plumbing, or demolition, and in most cases none of that is needed anyway. We measure your finished opening, build the door to it, and install it. If you are in the middle of a remodel, finish the tile first, then call us and we will measure once the walls are final.
Get A Quote On A Framed Door
Text (586) 800-9481 or call (586) 315-8900 to set up a free, no-pressure in-home measure in Grosse Pointe. We will give you an honest recommendation, framed or not.