Custom Frameless Shower Doors Built For Birmingham
Heavy 3/8 inch tempered glass, discreet hardware, and clean sightlines measured to your Birmingham bath. We bring the measure to you from our Sterling Heights showroom, then fabricate and install with our own crew.
The Premium Frameless Look, Measured To Your Bath
A frameless enclosure is the look most Birmingham homeowners picture when they imagine a high end bath. There is almost no metal in the way, just thick glass held by a few discreet clips and hinges, so the tile, the stone, and the fixtures you chose stay the center of attention. That minimal design only works when the glass is cut and set precisely, because the panels carry their own weight and rely on tight, accurate measurements. We use 3/8 inch tempered safety glass as our standard, which gives frameless doors the solid, steady feel you want every single time you open and close them.
Birmingham baths run the full range, from historic homes near downtown to new builds with wide walk in showers, and frameless glass suits both when it is planned around the actual opening. Because the same family measures, fabricates, and installs every enclosure, the crew that takes the measurements is the one that hangs the door, so nothing gets lost in a handoff. We talk through hinge placement, how the door should swing, and where the handle feels natural before anything is cut. The result is an enclosure that fits the space it was made for and looks like it belongs in the room.
Frameless Shower Doors, measured and built for Birmingham.
Heavy 3/8 Inch Glass
Our standard is 3/8 inch tempered safety glass, the thickness frameless doors need to stand on their own. It hangs true, closes with a reassuring weight, and holds its shape over years of daily use. Thinner glass can wobble and rattle over time. Ours is built to feel solid.
Minimal Discreet Hardware
Frameless design keeps metal to a minimum, so the glass and your tile do the talking. Hinges and clips come in a full range of finishes to match your fixtures and lighting. Tell us the look you are after and we will walk you through the options.
Made For Your Opening
No two Birmingham baths are identical, so we do not work from stock sizes. Every panel is measured to your opening, cut in house, and installed by the same crew. That is how the door lands level, the gaps stay even, and the whole enclosure feels intentional.
Why Frameless Glass Rewards Careful Fitting
With frameless glass, there is nowhere to hide a sloppy measurement. There is no surrounding frame to cover an uneven wall or a shower curb that is slightly out of square. That is exactly why we measure in person, in your home, and account for the real conditions of the room before we cut anything. Older Birmingham homes often have walls that have shifted over the decades, and even new construction can carry small surprises. Seeing the space ourselves is how we plan glass that sits flush and swings clean.
Hard water is a fact of life across Oakland County, and clear glass shows spots faster than almost any surface in the house. We will talk with you about easy clean glass options and the daily habits that keep a frameless enclosure looking new, like a quick squeegee after each shower. We will also be honest about hardware, because good hinges and seals are what keep a heavy door quiet and aligned for the long haul. Our goal is an enclosure that still looks and works right years from now, not just on install day.
- 3/8 inch tempered glass
- Discreet clips and hinges
- A full range of finishes
- In home measure and quote
- Cut and installed in house
- Easy clean glass options
Common questions.
Do you install frameless shower doors in Birmingham?
Yes. We serve Birmingham and the surrounding Oakland County communities from our showroom at 42624 Van Dyke Ave in Sterling Heights. You do not need to drive to us to get started. We bring the measure to your home, review your bath in person, and give you a written quote. From there, we fabricate and install with our own crew.
How does the free in home measure work?
You pick a time that works, and we come to you. We look at the opening, check the walls and curb for square, and talk through how you want the door to swing and where the hardware should sit. Then we measure precisely and give you a no pressure quote. There is no charge and no obligation to move forward.
How thick is the glass on a frameless door?
Our standard is 3/8 inch tempered safety glass. That thickness matters most on frameless doors, since the panels support themselves without a full frame. It gives the door a solid, stable feel and helps it stay aligned over time. Tempered glass is also a safety feature, since it is built to break into small, blunt pieces rather than sharp shards.
Will hard water spot my new frameless glass?
Oakland County has hard water, so any clear glass can show spotting if it is left to air dry. The good news is that it is easy to manage. We can talk through easy clean glass options during your measure, and a quick squeegee after each shower goes a long way. We are happy to share simple care tips that keep the glass clear.
Can a frameless door fit an older Birmingham bathroom?
Yes, and custom fitting is exactly why. Older homes near downtown often have walls that are no longer perfectly plumb, which is hard on stock enclosures. Because we measure in person and cut every panel to your actual opening, we plan for those quirks instead of fighting them. The finished door sits flush, swings clean, and looks like it was made for the room, because it was.
Ready For Frameless Glass In Birmingham?
Book your free, no pressure in home measure and quote. Call (586) 315-8900 or text (586) 800-9481, and the same family that measures your bath will fabricate and install it.