Glass Shower Door Installation In Rochester Hills
If your tile is going in and you are wondering who does the glass, that is us. The same family measures, fabricates, and installs every enclosure, with our own crew and no subcontracted glass.
One Family, From Measure To Install
When the tile is finished and the shower is ready to close in, most homeowners hit the same question. Who actually installs the glass? It is common for a door to be sold by one company and for the glass work to be subcontracted out, so the person who measured, the shop that cut the glass, and the installer standing in your bathroom are three different parties who never spoke. That handoff is where measurements get lost and gaps show up. Fortune does all three steps in-house. The same family measures your Rochester Hills bath, fabricates the enclosure, and installs it, so nothing gets translated along the way.
Installation is not a matter of pulling a boxed kit off a shelf. Shower openings are almost never perfectly plumb or square, and a stock door forced into a real opening is how you end up with gaps and leaks. So we come out to the house, measure the actual opening once the tile is in and the walls are final, and build the glass to those numbers. On our frameless work, 3/8 inch tempered safety glass is standard. On install day our crew sets the panels level, aligns the hardware, seals what needs sealing, and cleans up. The measure and the quote are free, and there is no pressure attached to either.
Glass Shower Door Installation, measured and built for Rochester Hills.
Free In-Home Measure
We come to your Rochester Hills home, measure the actual opening, and talk through glass and hardware in the room where it will live. You get honest options and a real quote, with no pressure and no obligation. Booking it costs you nothing but the time it takes.
Fabricated In-House
Your enclosure is built to the numbers we took in your bathroom, not to a stock size that almost fits. We fabricate the glass ourselves and we do not subcontract it out, so if something needs adjusting, it is our own shop making the adjustment. On frameless work, 3/8 inch tempered safety glass is standard.
Installed By Our Crew
The crew in your bathroom on install day works for the same family that measured it. They set the glass level, align the hinges or the track, seal where water would otherwise find a way out, and clean up before they leave. No rotating subcontractors, no finger pointing.
Who Installs Shower Doors In Rochester Hills
We do, and we come to the house. Rochester Hills is a short drive from our showroom at 42624 Van Dyke Ave in Sterling Heights, and we cover Macomb and Oakland County. Whether it is a new build, a bath someone else is remodeling, or a shower that has lived with a curtain long enough, the process on our end is the same. We measure the finished opening, build the glass to it, and install it ourselves. One family, one crew, one point of contact.
You can also come see the glass and the hardware in person. The showroom is open Monday through Friday, 9 to 5, and Saturday, 10 to 2, and it is worth putting your hands on a finish before you commit to it. Metro Detroit water is hard, so this is the moment to ask about easy-clean glass and quality hardware, before anything is ordered rather than after you have spent a year fighting spots. Call, text, or email and we will get you on the calendar.
- Free in-home measure
- Custom fabrication, no stock kits
- Installed by our own crew
- No subcontracted glass
- New builds and remodels
- A full range of finishes
Common questions.
Who installs shower doors in Rochester Hills?
We do. Fortune Shower Doors is a family-owned shower door showroom at 42624 Van Dyke Ave in Sterling Heights, and Rochester Hills is a short drive up the road. The same family measures, fabricates, and installs every enclosure with our own crew, so there is no subcontracted glass and no handoff. Start with a free in-home measure. Call (586) 315-8900 or text (586) 800-9481.
Should I schedule the measure before or after the tile goes in?
After. Glass has to be built to the opening as it actually finishes, not as it was framed, so we measure once the tile is set and the walls are final. That said, call us while the tile work is underway so we can plan ahead and be ready when the room is. A quick call early keeps the project moving.
How long does a shower door installation take?
It depends on the enclosure and the opening, so we would rather give you a straight answer standing in your bathroom than a guess over the phone. Custom glass has to be fabricated after the measure, so there is time between the two visits. We lay out what to expect at the measure, and we will not leave you wondering where things stand.
What glass should I choose for Metro Detroit water?
Macomb and Oakland County water is hard, which is a real reason to choose easy-clean glass and quality hardware from the start rather than fighting spots later. Ask us about protective glass at the measure and we will explain the options plainly. Then keep a squeegee in the shower. That habit does more for clarity than any cleaner on the shelf.
Can I see the glass and hardware before I decide?
Yes. Come by the showroom at 42624 Van Dyke Ave in Sterling Heights, Monday through Friday, 9 to 5, or Saturday, 10 to 2, and put your hands on the glass and the finishes. If that is not convenient, we bring options to the free in-home measure so you can hold them against your own tile. Email [email protected] with questions any time.
Ready To Get The Glass In?
Call (586) 315-8900 or text (586) 800-9481 to book a free, no-pressure in-home measure in Rochester Hills. We bring options and leave you a real quote. No obligation.