Choosing a shower door is much easier when you can see glass options and hardware in person. If you live in Sterling Heights, Troy, Rochester Hills, Shelby Township, Macomb Township, Warren, Clinton Township, Royal Oak, Birmingham, or Bloomfield Hills, here’s exactly how to prep, what to bring, and how to make the most of a short visit—so you leave with a confident design direction and a clear quote.
Showroom address: 42624 Van Dyke Ave, Sterling Heights, MI 48314
The quick plan (read this first)
- Bring 5–10 photos of the bathroom from several angles (and a wide shot of the whole room).
- Take five measurements (widths at three heights, overall height, depth)—details below.
- Know your must-haves (sliding vs. swing, privacy level, threshold style).
- Bring samples (tile, paint swatch, cabinet pull, or metal finish) to match hardware and glass tone.
- Aim for mid-week mornings or early afternoons for the quietest browsing experience.
Parking & timing tips
- Parking: Convenient onsite parking is available in the immediate area around the showroom. If you need assistance unloading samples, call as you arrive and we’ll help you bring them in.
- Peak times to avoid: Saturdays and late weekday afternoons can be busier (folks driving in from Troy and Rochester Hills after work).
- Best times: Mid-week, mid-morning or early afternoon often provides the most unhurried walk-through.
- Bringing a contractor or designer? Perfect—two sets of eyes make selection and field details go faster.
(If you prefer a dedicated consultation window, call ahead to schedule—drop-ins are welcome, too.)
What you’ll see in the showroom
- Sliding systems: Double-bypass and single-slider (barn-style) displays you can open/close to feel roller quality and soft-close damping—ideal for the 60″ alcoves common in Sterling Heights, Warren, and Clinton Township.
- Swing/pivot options: Frameless door + panel configurations, magnetic strikes, tapered thresholds—great for larger showers in Troy, Birmingham, and Bloomfield Hills.
- Glass board: Clear vs. low-iron, privacy choices (Satin/etched, Rain, Reeded/Fluted), and Cast Glass textures you can compare against your tile and paint.
- Hardware wall: Pulls, towel bars, hinges, clips, headers, and finishes (brushed nickel, stainless, matte black, soft brass) to coordinate with your fixtures.
- Seal & sweep examples: See how bottom sweeps, strike magnets, and deflector seals control splash before you commit.
Your 15-minute measurement checklist (do this before you visit)
These quick measurements help us price accurately and spot any out-of-plumb or splash-risk issues early. A simple sketch with numbers is perfect.
For an alcove (three walls):
- Width at curb (A) – left tile to right tile.
- Width at ~36″ high (B) – left tile to right tile.
- Width at top (C) – left tile to right tile.
- Overall height – from top of curb to where you want the glass to end.
- Depth – back wall to front of curb (useful for splash planning).
For a corner or neo-angle:
- Panel edge lengths and angles if known; otherwise photos plus rough edge lengths are fine.
Room context (helps us help you):
- Aisle clearance in front of the curb to the nearest obstruction (vanity, toilet).
- Plumbing wall (left/right), niche and bench locations/dimensions.
- Ceiling height (note if it’s under 8′ or over 8′).
- Curb slope (should slope into the shower) and any pony wall caps.
Tip for homes in Royal Oak and Madison Heights: If walls aren’t perfectly plumb, jot any differences between A, B, and C. A 3/16″ variance is common and easy to handle—we’ll advise whether an adjustable system or full custom is best.
What to bring (besides measurements)
- Photos: Far-back shots with the door open and closed if it’s a remodel; include the floor outside the shower to assess splash paths.
- Finish sample: A cabinet pull or faucet finish for matching hardware (brushed vs. polished can look very different next to your tile).
- Tile or paint swatch: Helps decide between clear vs. low-iron glass and the right privacy texture.
- Wish list: Sliding vs. swing, privacy level, doorless vs. door, and any specific accessibility goals.
How your consultation flows (typical 30–45 minutes)
- Layout & goals (5–10 min): We review photos, measurements, and traffic paths.
- System fit (10–15 min): Try sliding vs. swing displays, talk seals/splash control, and confirm clear-opening needs.
- Glass & finish (10–15 min): Pick clear/low-iron and any privacy pattern; match hardware to your samples.
- Quote & next steps (5–10 min): Same-day ballpark with options (e.g., TruFit-style slider vs. fully custom heavy glass). If everything looks good, we schedule a field measure.
Sliding vs. swing: deciding in minutes
- Tight aisles or a door that would hit a vanity/toilet? → Sliding
- Widest possible entry or caregiver access? → Swing/pivot (outswing or dual-action)
- Shallow 30–32″ depth and you worry about splash? → Sliding or pivot + tapered threshold + seals
- Steam feel or extra-tall design? → Custom swing + transom (we’ll show examples)
Privacy & brightness (see them side-by-side)
- Satin (etched) for maximum blur without losing light—great for windowless halls in Sterling Heights.
- Rain for classic texture that hides hard-water spots—popular in Warren and Clinton Township family baths.
- Reeded/Fluted vertical to complement mid-century and modern renovations in Royal Oak and Birmingham.
- Cast Glass for a statement in upscale primaries around Troy and Bloomfield Hills.
Water control (design it in, don’t fight it later)
- Bottom sweeps that actually touch the sill/threshold (tech-adjustable).
- Deflector seals at the strike for handheld overspray.
- Tapered thresholds on swings or true-level curbs for sliders.
- Spray direction: Aim away from the door seam and entry—especially in 60″ x 32″ conversions.
Care & cleaning (hard-water savvy)
- Daily: Quick squeegee and microfiber wipe on hardware.
- Weekly: Non-abrasive cleaner (stone-safe if you have marble/travertine).
- Monthly: Inspect and replace bottom sweeps or tired seals—cheap parts, big difference.
Budget & timeline expectations (typical, not a quote)
- Adjustable slider (TruFit-style): Efficient pricing and fast turnaround—excellent in mildly out-of-plumb alcoves common across Macomb Township and Warren.
- Custom heavy glass: Higher material/templating time, best for complex layouts, steam, pony walls, or premium aesthetics in Troy, Birmingham, and Bloomfield Hills.
- Process: Visit 1 (showroom) → Field measurement → Fabrication → Visit 2 (installation).
Frequently asked questions
Do I need an appointment?
Walk-ins are welcome; if you prefer a dedicated time (or are bringing a contractor/designer), call ahead so we can prepare samples tailored to your project.
Can you price from photos alone?
We can provide a ballpark in the showroom from photos and the measurements above; final pricing follows a field measure to confirm sizes and site conditions.
What if my walls aren’t perfectly straight?
That’s normal in many homes from Sterling Heights to Royal Oak. We’ll advise whether an adjustable system will be perfect or if custom templated glass is the better long-term fit.
How soon can you install?
Lead times vary by glass, finish, and season. We’ll share current timelines during your visit and lock them after field measure.
Ready to stop scrolling and start seeing?
Bring your quick measurements, a few photos, and any finish samples. Compare sliding and swing systems, privacy glass, and hardware in person—then leave with a clear plan and next steps.
Visit our showroom: 42624 Van Dyke Ave, Sterling Heights, MI 48314
Serving Metro Detroit with precise measurement, clean installations, and options that fit your space, style, and routine.
