Shower Door Replacement In Rochester Hills, MI
Leaking, foggy, rusted, or just dated. If you already have a shower door you are tired of, we take it out and set new custom glass in the same opening, usually without touching your tile.
New Glass Without A Full Remodel
Sometimes the bathroom is fine and the door is the problem. The glass has hard water etched into it and will not come clean no matter what you spray on it. The frame is pitted or rusting at the bottom. The door drags, or it does not close square anymore, and water finds the floor. Or the tile and the vanity still look good, but the door is a dated finish that drags the whole room backward. Oakland County water is hard, and over enough years it leaves its mark on glass and hardware. Replacing the door is the fastest way to make the whole bath feel new again.
We replace shower doors, we do not patch them up. Once hard water has etched the glass or a frame has started to rust, there is no bringing it back, and chasing it with new parts is money spent on an old problem. So we do it once and do it right. We measure your opening the way it stands today, because walls move over the years and the original numbers may not be true anymore. Then we fabricate new glass to that exact opening, take the old door and frame out, and set the new enclosure in its place. Your tile stays where it is.
Shower Door Replacement, measured and built for Rochester Hills.
Out With The Old
We take the old door, frame, and track out and set new custom glass in the same opening. That is the whole job. You get a clean, current enclosure without living through a bathroom renovation, and the old leaking, foggy unit leaves with our crew when we go.
Your Tile Stays Put
A replacement is not a remodel. We do not do demolition, plumbing, or tile work, and in most cases none of that is needed. The tile you already have stays exactly as it is. Only the glass and the hardware change, which is what makes the room look new.
Built To Today's Opening
We never build from the old door's numbers. Houses settle and openings shift, so we measure what is actually there today and fabricate the new glass to that. It is the difference between an enclosure that seals and one that leaves you a gap along the wall.
What A Replacement Actually Involves
It starts with a free, no-pressure measure at your Rochester Hills home. We look at the door you have, how it is mounted, the condition of the curb and the tile, and the opening as it stands today. Then we tell you plainly what can go back into that space. You choose the glass and the finish from a full range of options, in your own bathroom, where you can see how they read against your tile. Nothing gets ordered until you are sure.
On install day our own crew takes the old door, frame, and track out and sets the new glass in its place. Same family, start to finish, no subcontracted glass and no handoff to a stranger. We align the hardware, seal what needs sealing, and take the old unit away with us. The tile you already have never gets touched. You keep the bathroom you like, and you lose the door you have been apologizing for.
- Old door and frame removed
- No tile work required
- New glass cut to fit
- Replaces leaking, foggy glass
- A full range of finishes
- Installed by our own crew
Common questions.
Do I have to redo my tile to replace a shower door?
Usually not. In most cases the new glass goes into the same opening and the tile never gets touched. We do not do tile work, demolition, or plumbing. If we find damaged tile or a bad curb at the measure, we will tell you honestly so you can have it addressed before we install, rather than building new glass onto a problem.
Should I replace my shower door or try to fix it?
It depends on what has failed. When the glass is etched or clouded and will not come clean, or the frame has rust and the seals are worn out, a new custom enclosure usually gives a better and longer lasting result than patching the old one. Call the showroom at (586) 315-8900 or text us a photo of your door, and we will tell you honestly what we think makes sense for your bathroom.
My shower glass is cloudy and will not come clean. Why?
That is hard water, and Metro Detroit has plenty of it. Over years, minerals etch into the surface of the glass, and at that point no cleaner or scrubbing brings the clarity back, because the damage is in the glass and not on it. Replacing the panel is the only real fix. Ask us about protective easy-clean glass so the new one holds up better.
Can I change the style of door when I replace it?
Often, yes, and replacement is the natural moment to do it. Plenty of homeowners take the chance to move away from a heavy old frame, or to change the way the door opens. What is possible comes down to your opening, the curb, and the walls, so we look at all of it during the free measure and give you honest options.
Do you replace shower doors in Rochester Hills?
We do. Rochester Hills sits a short drive from our showroom at 42624 Van Dyke Ave in Sterling Heights, and we cover Oakland and Macomb County. The measure and the quote are free, with no pressure. Call (586) 315-8900, text (586) 800-9481, or email [email protected]. We are open Monday through Friday, 9 to 5, and Saturday, 10 to 2.
Tired Of Looking At That Door?
Call (586) 315-8900 or text (586) 800-9481 for a free measure in Rochester Hills. We will show you what fits your opening and quote it honestly, with no pressure.