Glass Shower Door Installation In Bloomfield Hills
One family measures, fabricates, and installs your glass, with no subcontractors in the middle. If you are asking who installs shower doors in Bloomfield Hills, the answer starts with a free in-home measure.
Who Installs Shower Doors In Bloomfield Hills
In this trade, the measure, the glass, and the install often come from three different companies. A salesperson takes the numbers, a supplier cuts the panel, a subcontractor hangs it, and when something does not line up, everyone points at everyone else. Fortune is not built that way. We are a family-owned showroom in Sterling Heights, and the same family measures your opening, fabricates the glass, and installs it. Nothing is handed off. That single chain of custody is why the reveals stay even, and why the people who did the work are the people who answer the phone. It also keeps the schedule in our own hands.
Installation is the service homeowners in Bloomfield Hills call about when the tile is going up and nobody has ordered the glass yet. New construction, a full remodel, a builder punch list, or a first enclosure in a bath that has only ever had a curtain. The process is the same in each case. We come out for a free measure once the opening is ready, walk you through glass, hardware, and finish options in plain terms, and give you a quote with no pressure attached. Then we fabricate, then we install. You do not have to project-manage any of it.
Glass Shower Door Installation, measured and built for Bloomfield Hills.
Free In-Home Measure
We come to your Bloomfield Hills home, check the walls for plumb, the curb for level, and the opening for square, and take the readings ourselves. You get a quote and time to think about it. There is no fee for the visit and no obligation at the end of it.
Built In-House
Your glass is fabricated by the same family that measured for it, cut to your readings instead of to a stock size. Frameless work uses 3/8 inch tempered safety glass as standard. Because we are not waiting on an outside shop, the schedule stays in our hands and so does the quality.
Installed By Our Crew
The people who set your glass work for Fortune. No subcontracted labor, no unfamiliar van in the drive. They anchor the hardware, set the panels, seal the joints, clean up, and show you how to care for the glass before they leave. One company, from the first call to the last.
How A Fortune Install Goes
Call or text and tell us what you are working with. We set a time that suits you, weekdays or Saturday, and come out to measure. If your bath is still under construction, the right moment is once the tile is finished and the walls are done, because that is what the glass has to meet. We will take the readings, talk through frameless, semi-frameless, framed, sliding, hinged, or a tub enclosure, and tell you which ones your opening actually supports. Then you get a quote and time to sit with it.
Once you approve the quote, the glass is fabricated to your numbers and our crew comes back to install. Hardware is anchored into solid backing, the panels are set, the joints are sealed, and the site is left clean. Before we go, we walk you through how to look after the glass, which matters here, because Metro Detroit water is hard and the right glass plus a squeegee goes a long way toward keeping an enclosure clear. Then you are dealing with one company, not three.
- Free in-home measure
- Custom fabrication, no stock sizes
- 3/8 inch tempered glass standard
- Our own crew, no subs
- New builds and remodels
- Mon to Fri 9-5, Sat 10-2
Common questions.
Who installs shower doors in Bloomfield Hills?
Fortune Shower Doors does, from our showroom at 42624 Van Dyke Ave in Sterling Heights. We cover Bloomfield Hills and the rest of Oakland County. The same family measures, fabricates, and installs every enclosure, so there is no subcontractor between you and the glass. Call (586) 315-8900, text (586) 800-9481, or email [email protected] to get on the schedule.
When in a remodel should I book the measure?
Once the tile and walls are finished. Glass has to meet those surfaces exactly as they end up, so measuring before the tile goes on means guessing. If you are mid-project, call us anyway and we will tell you roughly where you are in the timeline and when to have us out. We do not do tile or plumbing, so we work around your contractor.
What happens at the in-home measure?
We check the opening for square, the walls for plumb, and the curb for level, then take the readings we need to build to. You see glass, hardware, and finish options, and we answer questions in plain terms. At the end you get a quote and time to think. There is no fee and no pressure, and no one will chase you afterward.
Do you do the tile and plumbing too?
No. Fortune is a shower door company. We measure, fabricate, install, and replace glass enclosures, and that is what we are good at. Tile, plumbing, and the rest of the bath belong to your contractor. Installs often land at the end of someone else's remodel, and we are used to coordinating with a builder schedule. Call or text and we will fit into yours.
Should I pick easy-clean glass in Oakland County?
It is worth a serious look. Metro Detroit water is hard, and minerals leave spots on any glass. An easy-clean coating helps the surface shed water so those spots wipe off with less effort, which shows up every week for as long as you own the shower. We will explain what it does and what it does not do at the measure, then leave the choice to you.
Ready To Get Your Glass Installed?
Book a free, no-pressure in-home measure in Bloomfield Hills. Call (586) 315-8900 or text (586) 800-9481, and the same family that measures will build and install your glass.