Condo And Multi-Family Shower Doors In Sterling Heights, MI
One bathroom is a decision. A whole property is a system. This page is about choosing a spec you can repeat opening by opening, and keeping the parts behind it down to one small box on a shelf.
Buy A System, Not A Pile Of Doors
The difference between one shower door and a property full of them is not size, it is repetition. Every decision you make on the first opening gets made again on every opening after it. Choose once and the property runs on a single spec, a single parts kit and a single phone call. Choose opening by opening and you inherit several kinds of roller, several header profiles, and a handle nobody can source the day it strips. We measure, fabricate and install in house as one family, which is what makes holding one spec across a property realistic rather than aspirational.
For most multi-unit work the workhorse is a bypass slider. Two panels pass each other on a header track, so nothing swings out into a tight bathroom, nothing blocks the toilet, and there are far fewer failure-prone moving parts. That is the whole argument in a building where the door gets used every day by people who did not choose it. The case for sliding shower doors is on its own page, and where a unit has a tub opening rather than a stall, the same logic runs through bathtub shower doors.
Almost nobody does every unit at once. Work goes in phases, as units turn over, as owners sign off, as money frees up. That is normal, and it is why the spec matters more than the calendar. Write it down now and the units you do later still match the ones you did first. Where the tile and pan are staying and only a tired enclosure has to go, the job is shower door replacement, old glass out and hauled away. Where an older opening has moved enough that a frameless panel would fight it, framed shower doors absorb the variation and keep your spec intact.
What Makes A Spec Repeatable
One Parts Kit, One Small Box
The point of repeating a system is not that the doors look alike. It is that the spares do. When every unit runs the same rollers, the same track and the same handle, the property keeps one small box on a shelf, and a worn roller is a shelf item rather than a hunt for something discontinued.
Spec Hardware That Does Not Call You Back
Stainless steel rollers with stainless or solid brass hardware eliminate the most common warranty call before it happens, and that matters far more across a property than in one house. Handles and towel bars should be through bolted to the glass rather than glued on plastic, because in a shared building every handle eventually gets pulled by somebody in a hurry.
Same Building, Different Numbers
Two units with identical floor plans on paper rarely measure the same. Older buildings around here settle the way the houses around them do, so walls lean and alcoves stop being square. Measuring and fabricating in house lets us hold your spec while cutting each panel to the opening it goes into.
Working In A Bathroom Somebody Lives In
A house is empty when you want it empty. A unit is not. Somebody lives in most of these bathrooms, so the work gets planned around a resident rather than a jobsite. We work one opening at a time, we need the bathroom clear and a path to it, and we need a straight answer on who is letting us in. If your building sets hours for contractor work or a process for arranging access, tell us up front and we work to it. The measure still happens in person, in the unit, because a stack of identical floor plans will not tell us how far any one wall leans.
The other thing worth settling before anyone measures is who is holding the spec. That decision can sit with an owner, a board member, a manager or the GC, and an owner in a shared building may have rules of their own to clear before anything visible changes. That is your process, not ours, but it usually decides when a phase can start, so give us the schedule you are given and we build around it. On finish, matte black and brushed gold look excellent and we install them constantly, but where cleaning crews run aggressive products daily it is worth talking through which of the full range of finishes holds up. Sterling Heights sits in hard water country too, so easy-clean coatings belong in that same conversation.
- One door system and one parts kit written down, then repeated
- Stainless rollers with stainless or solid brass hardware specified
- Handles and towel bars through bolted to the glass, never glued on
- Every opening measured in the unit, never off a floor plan
- One named person holding the spec across every phase
- Building hours and access arrangements confirmed before we come out
Common questions.
Our units have different bathroom layouts. Can they still share one spec?
Usually yes, and it is the right goal. The spec that matters is the hardware and the glass, not the door style. A stall, a tub opening and an awkward alcove can all carry the same rollers, the same finish and the same handle while running different door types.
Do we have to do the whole property at once?
No, and most owners do not. Phases are normal, whether that is a floor at a time or a unit as it turns over. What keeps phased work coherent is settling the spec at the start and holding it, so a unit finished much later still draws from the same box of spares.
Who from our side should be on the call?
Whoever can hold the spec. Owners, board members, managers and general contractors all reach us on multi-unit work, and any of them is fine. What hurts a phased project is a selection that gets reopened every phase. Name one person to own the glass and hardware.
The units are occupied. How does that change the work?
We plan around the resident. One opening at a time, a clear path to the bathroom, and a confirmed answer on who is letting us in. If a unit has only the one shower, say so when we come out. If your building sets working hours, we work to them.
What hardware should we specify for a high traffic building?
Stainless steel rollers with stainless or solid brass hardware, and handles and towel bars through bolted to the glass rather than glued on plastic. Those two remove the most common warranty call before it happens. Then hold that combination across every unit so your maintenance staff stocks one set of spares.
Can we handle the hardware before we commit to a spec?
Yes, and on multi-unit work you should. The showroom is at 42624 Van Dyke Ave in Sterling Heights, open Monday to Friday 9 to 5 and Saturday 10 to 2. Bring your cleaning products and your fixture finish, roll the sliders back and forth, and pull on the handles.
Spec It Once, Then Repeat It
Call (586) 315-8900, text (586) 800-9481 or email [email protected] and walk your openings with us. Free in-home measure, a no-pressure quote, and every panel built in house by one family, never subcontracted.